


Minnesota Dental X-Ray Compliance Guide
A practical guide to registration, equipment evaluations, radiation safety records, and MDH inspections
Keeping your dental office compliant with Minnesota's X-ray regulations shouldn't be unnecessarily complicated. But compliance involves more than having your equipment tested every two years. Your office also needs accurate registration information, a designated Radiation Safety Officer, current technique charts, and organized radiation safety records. Here's what Minnesota dental offices should know—and what to keep track of throughout the year.
1. Who Is Responsible for X-Ray Compliance?
Every Minnesota dental facility that operates X-ray equipment is responsible for meeting applicable Minnesota Department of Health (MDH) requirements. Each facility must designate a Radiation Safety Officer (RSO) to oversee its radiation safety program.
The RSO helps ensure that required evaluations are completed, staff receive appropriate training, records are maintained, and equipment concerns are addressed. The dentist-owner may serve as RSO if qualified, but another qualified individual may also be designated.
What to check: Does your office have a designated RSO who understands their responsibilities and knows where your radiation safety records are kept?
Official reference: Minnesota Rules — Radiation Safety Officer Responsibilities
2. Is Your X-Ray Equipment Properly Registered?
Minnesota requires dental X-ray equipment to be registered with MDH. Your office has access to an online registration account where you can review your facility information and equipment records. It's worth checking periodically, especially when equipment has been installed, replaced, or removed.
What to check: Compare the equipment listed in your MDH account with the X-ray units actually installed in your office.
Minnesota X-Ray Registration Portal
MDH also provides guidance on equipment changes and required notifications.
3. Equipment Performance Evaluations (EPEs)
An Equipment Performance Evaluation (EPE)—often called an X-ray calibration—is a series of tests used to determine whether your X-ray equipment is operating within applicable performance requirements. Minnesota generally requires these evaluations at intervals not exceeding 24 months. Additional testing may be required following installation or certain equipment changes. An EPE documents how your equipment performs. It is not simply a visual inspection or routine maintenance visit.
What happens if your X-ray doesn't pass?
A failed EPE requires prompt attention. Depending on the problem, the equipment may need to be repaired or replaced. A failed evaluation does not automatically mean you need to purchase a new X-ray system. However, the problem must be addressed, and continued equipment use may be restricted until corrective action is completed and verified.
At North Star Dental Services, we discuss unsuccessful test results directly with the office, explain the findings, and help determine the appropriate next steps.
What to check: Are your EPEs current, and do you have complete reports for every X-ray unit?
Official reference: Minnesota Rules — Quality Assurance Program
4. Your Radiation Safety Manual
Minnesota requires dental facilities to maintain a site-specific quality assurance program as part of their radiation safety responsibilities.
Many offices organize this information in what they call a Radiation Safety Manual. The terminology can be confusing, but the distinction is simple:
Your radiation safety and quality assurance program is what Minnesota requires. Your Radiation Safety Manual is how your office may organize and document that program. Whether your records are maintained electronically or in a physical binder, they should be complete, current, and accessible.
Important documentation includes:
-
Radiation Safety Officer information and required training records.
-
Equipment registration and applicable installation documentation.
-
Completed EPE reports and corrective-action records.
-
Current X-ray technique charts.
-
Radiation safety procedures and annual program audits.
Don't overlook your technique cards or charts
Technique charts provide exposure information appropriate for the equipment and procedures being performed. They must be available near the equipment's controls.
North Star provides updated, equipment-specific technique charts when completing EPEs, including charts for intraoral, panoramic, cephalometric, and CBCT systems.
What to check: Is the current technique chart displayed near each X-ray controller, and can your office readily locate its EPE documentation?
Official reference: MDH Dental X-Ray Regulatory Guide
5. Annual Audits and MDH Inspections
Two different reviews are important to understand.
Annual radiation program audit
Minnesota requires dental facilities to review their radiation safety and quality assurance programs at least annually. This is an internal review, generally overseen by the RSO, to confirm that the program is being followed, required documentation is maintained, and identified problems are corrected.
MDH provides a sample dental audit to help offices complete this process.
MDH Dental Annual Audit Resources
Minnesota Department of Health inspections
MDH also conducts inspections of dental facilities. Unlike your annual internal audit, these are state evaluations of your facility's compliance with applicable radiation safety requirements. Inspectors may review equipment registration, EPE reports, technique charts, training records, annual audits, and documentation of corrective actions.
What to check: Could your RSO locate these records if an MDH inspector requested them today?
Official reference: Minnesota Rules — Radiation Program Audits
6. Good Records Make Compliance Easier
One of the simplest ways to prepare for an inspection is to maintain accurate records throughout the year. When an EPE is completed, make sure your office receives the full report and retains the required documentation. If a problem is identified, keep the original report, documentation of the corrective action, and any follow-up testing. Don't discard the original paperwork simply because a corrected report was issued. A clear record of what happened and how it was resolved can be important during a future inspection. You don't need to understand every technical measurement in an EPE. You should, however, know what documentation your office should receive and what questions to ask when something doesn't look right.
Additional Resources
We're developing several practical resources to help Minnesota dental offices manage these responsibilities:
-
What Should Your Dental Office Receive After an X-Ray EPE? — A simple guide to reports, technique charts, signatures, and recordkeeping.
-
Minnesota Dental X-Ray Compliance Checklist — A printable reference for your Radiation Safety Manual.
For official regulatory information, visit the Minnesota Department of Health Dental X-Ray Resources.
Need Help With Your Dental X-Ray Equipment?
North Star Dental Services provides dental X-ray Equipment Performance Evaluations throughout Minnesota. We provide comprehensive testing documentation, updated technique charts, and practical guidance when equipment needs attention. Whether you're scheduling routine evaluations or have questions about your equipment, we're here to help.
Learn About Our Dental X-Ray Calibration Services
This guide addresses Minnesota requirements. X-ray regulations differ in other states. For official requirements and facility-specific questions, consult the Minnesota Department of Health.